CO2 Fractional Laser Resurfacing

CO2 Treatment Canadamed Laser

CO2 Fractional Laser Resurfacing

CO2 Fractional Laser Skin Resurfacing is a Carbon Dioxide based laser which has been on the market of aesthetics for decades, and is still a fan favorite amongst patients, doctors, and medical aestheticians.

The beauty about this technology is that it truly is the most effective, non-invasive method of treating scars, acne scars, stretch marks, superficial hyperpigmentation, and fine lines with minimal downtime and fewer treatments than other technologies.

Scars and stretch marks occur due to “unorganized collagen” in the dermis. This often happens because of picking at a pimple, a deep cut or stab, or rapid stretching of the skin through weight gain or a growth spurt. Along with unorganized collagen, scars and stretch marks become more visible over time by increasing in depression. This happens when the area is not treated right away.

The technology is actually quite simple, and the treatment works using two methods:

  • *Heat is absorbed into the collagen level of the dermis, and plumping/reorganizing the collagen begins to take place
  • *It burns off dead skin cells, allowing them to slough off, minimizing the appearance of depressed scars and stretch marks almost instantly

Benefits of the treatment include:

  • *Little downtime for such an effective treatment
  • *Permanent results
  • *Safe for almost all skin types
  • *Reduction in superficial hyperpigmentation and sun damage
  • *Ability to treat fine lines on the skin
  • *Because our cell turnover rate is every 28-45 days, full results will be seen at least a month after your last treatment, meaning, that your skin will look great right away, but it gets even better!

CO2 Laser Skin Resurfacing

Carbon Dioxide Laser for Skin Resurfacing is one of the top modern laser technologies used for the removal of the skin’s damaged outer layer with precision. The advanced laser technology reveals the skin underneath the surface which is smoother, softer, and so much younger looking. The CO2, as well as the erbium laser technology, are 2 of the popularly used treatment options for skin resurfacing. CO2 Laser is also utilized to treat deeper facial wrinkles and lines. Erbium Laser, on the other hand, is used to eradicating moderately deep wrinkles and fine lines.

FAQs About CO2 Laser Skin Resurfacing

CO2 Laser Skin Resurfacing

Carbon Dioxide Laser for Skin Resurfacing is one of the top modern laser technologies used for the removal of the skin’s damaged outer layer with precision. The advanced laser technology reveals the skin underneath the surface which is smoother, softer, and so much younger looking. The CO2, as well as the erbium laser technology, are 2 of the popularly used treatment options for skin resurfacing. CO2 Laser is also utilized to treat deeper facial wrinkles and lines. Erbium Laser, on the other hand, is used to eradicating moderately deep wrinkles and fine lines.

How CO2 Laser Resurfacing Works

The CO2 laser procedure removes deeper damaged skin layers while stimulating the healthy skin underneath through regenerating this layer. Obvious wrinkles and lines are eliminated or reduced through the skin resurfacing treatment more than other procedures do. Licensed dermatologists and cosmetics surgeons perform the skin resurfacing laser treatment for safer and hassle-free results.

Latest Laser Treatment Technology

The use of laser resurfacing is considered the most advanced in its niche, where laser light beams are scattered or pulsed on the surface at a high rate. The process minimizes heat damage on the skin while allowing the powerful CO2 laser to remove deeper skin tissues and effectively get rid of creases and wrinkles. Dramatic age-defying results are proven for the laser skin resurfacing procedure.
The treatment on specific areas includes around the eyes or mouth or the entire face. A local anesthetic is applied on the treatment area, relieving any possible discomforts. General or intravenous anesthesia is applied for the treatment of the entire face.

Who should get the CO2 laser treatment?

Anyone who experiences any significant facial lines and wrinkling is the best candidates for the CO2 laser skin resurfacing treatment. The skin becomes prone to the drastic aging effects of the sun, gravity, and the specific movements of the face, making an individual look older than her age. The corrective procedure is also ideal for someone with uneven skin pigmentation or facial scars. Consult with a CO2 laser skin resurfacing specialist in order to confirm if one is a qualified candidate for the treatment.

CO2 Laser Skin Treatment Benefits

The significant reduction of lines and wrinkles on the face is one of the top benefits of precisely getting rid of layers and layers of damaged skin. The treatment “turns back the clock”, changing the complexion, and showing off a much younger underlying skin.
CO2 laser lessens the appearance of skin imperfections, particularly facial scars. It effectively corrects any moderate wrinkles and deep lines, photodamage, uneven skin pigmentation, benign lesions, precancerous spots, and all sorts of skin imperfections. A qualified and experienced dermatologist or cosmetics surgeon carefully analyzes the skin and determines if one is a candidate for the treatment.

Choosing between CO2 Laser and Erbium Lasers

Discussing the options with a licensed dermatologist or cosmetics surgeon is the best way to choose the treatment option between carbon dioxide and erbium laser skin resurfacing. Discuss the expectations and reasons why one wants to undergo the procedure. The CO2 laser provides a thorough treatment targeting moderate to deeper wrinkles and facial lines, however, this treatment needs a more extensive period of recovery which is typically 2 weeks.
Erbium laser skin resurfacing treatment, on the other hand, requires just a maximum of 1 week for recovery yet most patients don’t really mind the extra recovery time as long as the results are successful. Other patients with less severe facial wrinkles and lines wish to further explore the erbium laser treatment.

CO2 Laser Treatment Safety

The carbon dioxide (CO2) laser skin resurfacing treatment is a safe procedure as long as a skilled and licensed dermatologist or cosmetics surgeon carries out the process. The damaged skin is removed layer by layer in order to get a younger and rejuvenated appearance. There are minimal to no side effects and minor complications would eventually disappear on their own. The dermatologist or cosmetics surgeon will discuss the things to avoid especially during the recovery period.

Facts about Fractional CO2 Laser Resurfacing

Fractional CO2 Laser Resurfacing refers to 2 different laser skin resurfacing treatment types namely ablative and non-ablative, also considered treatment breakthroughs in the anti-aging niche. The treatments are both highly effective with age-defying results, correcting mild to severe imperfections and problems of the skin from dark spots to pronounced lines and deep wrinkles. Ablative and non-ablative treatments offer dramatic results with the use of the most advanced applications and technologies.

Difference between Ablative and Non-Ablative Treatment

Ablative fractional skin resurfacing offers significant results on the skin but the pixilated or fractionated CO2 laser resurfacing system also requires significant downtime or recovery period. Non-ablative treatment, on the other hand, such as the Fraxel system offers milder and gentler results with minimal recovery period or downtime. Patients usually look puffy and pink for just a matter of 4 to 5 days, however, one can certainly put on makeup or resume normal activities 24 hours after undergoing the treatment. There are different procedures used in the 2 treatment with different results.

How Non-Ablative Fractional Laser Works

The non-ablative treatment stimulates collagen production, a skin protein that is found in the skin’s connective tissues. The treatment goes deeper into the skin layer while stimulating collagen that makes the skin plumped up and fills facial lines and wrinkles, resulting in smoother, younger-looking, suppler, and firmer skin appearance. There is minimal discomfort, as well as, zero downtime in this process mainly because the procedure takes place within the skin layer and not on the surface.

Non-Ablative Treatment and Skin Collagen

Skin collagen is damaged over time due to numerous factors such as sun damage, aging, and pollution, making the skin saggy, blotchy, and loose in appearance. The use of light energy that produces tiny pinpricks in the skin stimulates the production of collagen through non-ablative Fraxel treatment. Fraxel treatment is different from the traditional fractional CO2 laser because it works without damaging the skin’s outermost layers. The treatment is ideal for mild to moderate wrinkles, giving the younger skin with minimal discomforts.

Fraxel Laser Treatment for Fine Lines and Wrinkles

Non-ablative laser skin resurfacing is an ideal treatment to bust fine lines and wrinkles or signs of aging that are not that deep and pronounced. It is an excellent procedure for sun spots, skin discoloration, and dark spots, penetrating the skin and allowing the spots to rise to the surface for easy removal.

Non-Ablative Laser Treatment Pros and Cons

The non-ablative resurfacing treatment requires minimal downtime and recovery period and it can be performed without anesthesia with minimal pain and discomforts after the procedure. A topical numbing cream is applied 1 hour before the treatment, depending on the pain threshold of the patient, in order to alleviate any treatment-related discomforts. Patients can apply make-up right after the procedure but in some cases when redness develops, patients can put on cosmetics 3-5 days post-treatment. One Fraxel laser resurfacing session usually takes approximately an hour to complete.

Important Note on Non-Ablative Treatment

Non-ablative treatment will not last for good simply because of the inevitable aging process and factors such as sun damage on the skin. Fine lines, wrinkles, and skin imperfections will eventually return but the initial treatment that targets underlying skin imperfections allows one to restore initial results and requires fewer sessions afterward. Patients should have proper skin care regimen such as lightening agents and retinol before the treatment. Skin regimen helps in getting the cells under control while laser improves the skin texture, tone, and pigment.

How Ablative Fractional Laser Resurfacing Works

Fully ablative laser resurfacing treatment essentially vaporizes the skin’s uppermost layers. Pixilated or fractional CO2 laser therapy uses a more intense light laser beam compared to its non-ablative counterpart and requires sedation or anesthesia. The outpatient surgical treatment also requires considerable downtime for the treated skin to fully recover.
Collagen production is stimulated through vaporizing the skin’s outermost layer and the treatment restructures the skin while healing. CO2 laser restructuring eliminates unwanted skin lesions while acting as a corrective measure for irregular skin pigmentation and smoothing out acne scars. Ablative laser resurfacing works to improve the skin’s appearance through reducing deeper wrinkles but it will not fully eradicate severe sagging and deep wrinkling.

Ablative Fractional Laser Up Close

Ablative laser therapy varies depending on their intensity and the depth of their penetration into the skin. Deeper skin penetration requires anesthesia and pain medication during and post treatment. Pain medicine is still required even with less aggressive treatments and in either case, it would take 2 to 4 weeks of recovery period or downtime. Ablative resurfacing procedures typically last from half an hour to 2 hours.

Post Treatment Recommendation

Patients are required to put on a mask bandage after the procedure and wear it for 2 days. The skin becomes raw and weeping and there could be significant discomfort upon removal of the bandage. Application of a skin ointment is necessary on a regular basis in order to facilitate healing where the healing process would usually take up to one month to complete.
Ablative laser treatment is an intense procedure but delivers dramatic improvement on the skin, making the results worth it. The treatment results include unblemished complexion, fresh, and younger skin that could remain youthful up to 5 years. Facial imperfections, wrinkles, fine lines, skin discoloration, and dark spots may return over time but the skin remains refreshed especially with additional laser sessions that require less intense treatments.

What More Do You Need to Know?

The general rule of thumb states that much stronger laser treatment is required if one wants more striking results but this could also require longer recovery time. Brown and dark spots, skin discoloration, and skin imperfections due to sun damage can be corrected with the use of a non-ablative Fraxel laser which is a less aggressive procedure. Acne scars and deeper wrinkles need more aggressive laser treatments.
Laser skin resurfacing treatment costs vary depending on the location, typically ranging between $1,000 and $5,000 per treatment. The overall reviews on laser resurfacing treatment are positive among patients especially procedures from licensed and experienced cosmetics surgeons or dermatologists. Patients should be amenable to deal with the longer recovery process, especially in ablative laser procedures. Fractional laser skin resurfacing guarantees remarkable results but consult a medical professional first prior to scheduling a treatment for hassle-free results.